Roll N Lock Bed Cover Problems and Solutions

Truck owners like the Roll-N-Lock bed cover owing to their flexible design. These can cover the entire bed and you may retract the covers as per your need. However, these bed covers can also be a tad problematic. These problems can be tackled without much hassle, though.

The commonplace Roll N Lock Bed Cover Problems

Cover don’t Stay Latch and Close

Some truck users grudge that their roll ‘n’ lock bed covers do not stay latched for long and get opened automatically. This may cause the cargo to get dirty or wet. There is the risk of cargo getting stolen if the cover is open.

This is often caused by a defective locking system. After prolonged usage, the locking mechanism may start acting weird, sometimes.

You may get the faulty lock replaced. To be on the safe side, get it installed by the dealer. Check if the truck bed rails are in place or not. Ensure you get the apt Roll n lock bed cover- without and with rail caps.

2 Leakage

Most Roll-N-Lock cover makers say their products are water-resistant but some buyers complain of the covers leaking.

This may happen when you drive the truck amidst heavy rain and some water seeps in through the ends of the cover.

You may evade deriving during heavy rain to prevent water leaking through the cover.

3. Damages caused in shipment

It is a common issue with some roll n lock bed covers. It may happen inadvertently.

Check a bed cover when you buy it or it is even better if you ask the dealer to set it up. Opt for a replacement if you have placed the order online.

4. Gets Stuck While Retracting

This is another issue with the roll n lock bed covers. It can be quite annoying.

The cover may get stuck by something stuck along the bed rails.

You should look for debris gathered on the bed rails. Apply some lubricant to the edge of the truck.

Roll-N-Lock cover Care and Maintenance

Listed below are some handy tips to keep your truck’s Roll-N-Lock bed cover in good shape:

• Cleaning the bed cover- Keep cleaning it with a suitable fluid and cloth to minimize operational issues.
• Lubricating the moving part- You may apply grease on the moving parts of the retractable cover to evade operational hassles.
• Looking for clutter- Look for debris in the cover’s rail section. It may gather if you drive a lot.
• Apply a protectant- Seal the cover with a protectant after cleaning it well to safeguard it better from numerous weather elements.

FAQs

• Are Roll-N-Lock Bed Covers hardy enough?

Hard tonneau covers tend to be longer-lasting than the retractable covers. However, the latter type is more versatile. It may last for 7 years approx.

• Do Roll-N-Lock Covers make noise?

If the installation is done right, operating a Roll-N-Lock tonneau cover will not produce noise.

• Does The Roll-N-Lock cover Fit All Truck Beds?

No, you may not find a Roll-N-Lock cover that fits all truck beds well. Checking the size of your truck bed before buying such a cover is prudent.

Summing it up

So, maintaining and using a roll n lock bed cover is not tough. Buy the apt one for your truck and perform basic maintenance to evade operational hazards.